Wavlink WiFi Repeater Setup With Ethernet Cable

[tony reacherr]

Ensure that the PC and repeater were originally connected by an Ethernet wire. The Ethernet port on your computer should be connected to one end of a cable, and the Ethernet port on the repeater should be connected to the other. As soon as you have turned on the repeater, allow it some time to initialize. A web browser should display "192.168.10.1" in its address bar. Press enter to go to the repeater's configuration page. Go to the wireless settings portion of the 192.168.10.1 wifi repeater setup page after logging in. In this case, you must set up the repeater to join your current WiFi network. For the WiFi network connected to your main router, provide the SSID and password. Save the settings after inputting the appropriate information, and then wait for the repeater to apply the modifications. As the repeater creates a connection with your primary router, it can take some time. Cut the Ethernet cord from your computer and the repeater once the connection has been made.