LED strips are a versatile lighting solution that can be used both indoors and outdoors. They are perfect for creating a cozy atmosphere on your patio or adding a touch of color to a theme park. However, if you want to install LED lighting in an outdoor location, it is essential to ensure that the strips are waterproof.
Accidental cuts or the need to join different segments of the strip may compromise its waterproof seal. In such cases, knowing how to re-seal the strip becomes crucial. By following a few simple steps, you can maintain the quality of your LED strip and make it last longer.
A suggestion for you to get more necessary and deeper information, please click here Best outdoor led light strips
Do It Yourself: Re-Waterproofing Your LED Strips
To re-seal your waterproof LED strip, you will need the following tools:
- Pair of scissors
- Waterproof LED strip (IP67 or IP68)
- Heat gun or a lighter
- Heat-shrink tubing in any color
- Pair of pliers with a flat tip
- Dielectric silicone (Note: regular household silicone may cause a short-circuit)
Let’s dive into the process. But before we do, it goes without saying that you should handle all items with care and avoid any dangerous situations. Safety first!
A suggestion for you to get more necessary and deeper information, please click here Best outdoor waterproof led strip lights
Now, here are the steps to re-seal your waterproof LED strip:
Cut the LED strip into segments: Make sure to cut the strip after every third LED base to maintain its functionality. For dual density, cut after multiples of six.
Cut the heat shrink tubing: Cut off about an inch of the heat shrink tubing and set it aside.
Apply the dielectric silicone: Put a dab of dielectric silicone on your finger and push it into the opening of the strip to create a barrier against water and moisture.
Put on the heat-shrink tubing: Slide the tubing over the end of the strip, leaving about half an inch hanging off the end. Use a heat gun to heat up the tubing, then pinch it with the flat-tip of the pliers to create a seal.
Trim the excess tubing: Finally, carefully cut off the excess heat-shrink tubing, ensuring not to break the seal you just created.
VOILÀ! You have successfully re-waterproofed your LED strip!
A suggestion for you to get more necessary and deeper information, please click here exterior outdoor led strip lights
Recap
Re-sealing your waterproof LED strip is a simple and effective way to extend its lifespan. By following these steps, you can restore and even enhance its original qualities. Share this guide with your colleagues and friends who might find it useful. And remember, if you have any questions, don’t hesitate to reach out to us. We’re always here to help. Happy re-sealing!
