T-Series Straight-Tube Coriolis Flow and Density Meters 3 Flow performance Mass Volume(1) (1) Specifications for volumetric flow rate are based on a process-fluid density of 1 g/cc (1000 kg/m 3).For fluids with density other than

Micro Motion® ELITE® Mass Flow and Density Meters 7 Gas flow performance continued Typical mass flow accuracy and pressure drop with CMF100 and transmitter with MVD Technology Air at 68 °F (20 °C), static pressures as indicated on graph Natural gas (MW 16.675) at 68 °F (20 °C), static pressure as indicated on graph Micro Motion RFT97121KN Remote Flow Transmitter. w/ DS012H205 Mass Flow Sensor. The photos provided are of the actual item. You will only receive what is actually shown in the photos. Therefore, we are not familiar with all the parts or accessories that would be included from the manufacturer. Configuration and Use Manual P/N 20001715, Rev. B September 2006 Micro Motion® Series 1000 and Series 2000 Transmitters Configuration and Use Manual • Model 1500 with analog outputs • Model 1700 with analog outputs • Model 1700 with intrinsically safe outputs • Model 2500 with configurable input/outputs • Model 2700 with analog outputs Are You Losing Money With Your Positive Displacement Meter? In addition to being the most accurate mass flow and density measurement meters available today, Micro Motion Coriolis meters can eliminate the repair and maintenance costs that make Positive Displacement (PD) meters an ongoing cost burden. Micro Motion ELITE Meters 5 Liquid performance specifications continued Typical mass accuracy, turndown, and pressure drop with transmitter with MVD Technology(1) (1) To determine accuracy, turndown, and pressure drop using your process variables, use Micro Motion's product selector at www.micromotion.com . R-Series General Purpose Mass and Volume Flowmeter Product Data Sheet PS-00363 June 2001 the maximum volume flow rate equals the maximum mass flow rate divided by the fluid's density. When properl