DS935Z and ZX935Z Series PIR Intrusion Detectors Radio Frequency Interference (RFI) Immunity: No alarm or setup on critical frequencies in the range from 2.0 Programming. Program the address DIP switches as described for the control panel you are using. Note: When installing the ZX935Z with a D7212B1, Zone Mini-Mod. ZX935Z. Motion w/POPIT. ZX794Z. Motion w/POPIT. ZX938Z 360. Motion w/POPIT. ISC–BPR2–W12/. WP12 PIR. 40 x 40 ft. ISC–BDL2–WP12G/. POPIT. D9127U/T. Mounting Instructions. • Remove the PCB before mounting the POPIT. • Leave Switch 0 ON when installing the D9127 with a D7212B1,.Bosch ZX935Z PIR Motion Sensor 35ft POPIT, Fast Shipping, 24/7 Support, Call (866) 440-2288. ZX935Z Installation Instruction (Size: 242.2 KB) 42 3 D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide ZX938Z, ZX935Z, ZX970, ZX794Z, or ZX835), these devices cannot be used on For more information on POPIT installation (including wire type, length, and run) and programming, refer to the D8125 POPEX Operation and Installation Guide Appendix B: Point Address Chart; Zonex 1, Points 9 To 40; Table 16: Zonex 1 Point Address Chart - Bosch D7212G Operation And Installation Manual. 4 Sep 2015