You have in your hand the ASKO Service Manual for the new generation of dryers that are friendly to the environment in both their manufacture and use. This new generation of dryers has been designed for ease of servicing. By this we mean that it's a simple job, for example, to replace a damaged side panel. That's why we've changed the design care and maintenance of your hand dryer. Installation should be done by a qualified electrican. Improper installation, alteration, service and use of this hand dryer can result in serious personal injury or damage to the unit. If you have questions regarding the installation, use or operation of the hand dryer, please call Royal Not only does the XLERATOR® Hand Dryer dry hands in one third the time required by conventional dyers, the unit runs on 15 amp service. The combination of these two factors results in an 80 percent energy savings compared to conventional hand dryer use. This guide specification, SECTION 10811 - RAPID DRYING ELECTRIC HAND DRYER, has Excel Dryer 40502 Details. Mount your Excel XLERATOR hand dryer inside your wall to keep it out of the way with the 40502 recess kit! This recess kit is designed to fit flush with your restroom wall tiling to provide a sleek appearance while keeping the dryer accessible to your customers. 1. Turn on power to dryer 2. Turn off power to dryer for 10 sec. then reapply power. If dryer turns on, then relocate the object or remount dryer as instructed in installation instructions to a min. of 15" above object. If this is not possible, adjust the range of the control board (send instructions) 3. Suggest switching optics from Installation instructions and template provide information that will assist in the installation of the Bobrick B-7120 and B-7128 115V, B-7120 and B-7128 208-240V. Retain Installation Instruction Sheet for important maintenance instructions and warranty information. 2. Rotate bottom of cover away from mounting base and then lift up. • User manual an