in this videoSeries you learn how to design and how works flame arrestor . you also learn all basics with full description. for full series subscribe Design Hub Like our Page https://www.facebook

Varec™ Flame Arrestors. Varec™ tank protection products provide vapor and fugitive emissions control in addition to fire and explosion protection through an integrated line of conservation and emergency vents, flame arrestors, regulators, gauge hatches, manway covers, and floating suction Explosions due to flame arrester failures are destructive, expensive and potentially deadly. Prior to 1989, no arrester provided protection against all types of flame propagation. In fact, no practical technology existed for testing detonation flame arresters used in piping systems. GAS CONTROL Introduction The Varec Biogas 450 Series Flame Trap Assembly was designed for use on lines to flares and fired process units to safely prevent a flame flashback. The extensive range of sizes allows its use in many applications encountered in the typical tank farm, liquid storage facility, landfill or waste water treatment system. Varec Series 5000/5010 Flame Arresters. Group 'D' end-of-line flame arresters with a unique extensible bank frame designed to stop the propagation of flame from external sources. Veteran owned manufacturer of cast iron flame arresters with brass gauge opening caps & stainless steel arrester plates. Available in 2 in. NPT sizes with 22,000 cfh vapor relief capacity at 2.5 psi pressure. Flame arresters are suitable for use with hydrocarbon flames such as gasoline in air. Enardo Series 7 In-Line Flame Arrestors are designed to stop the propagation of confined low-pressure deflagrations. The Series 7 is typically used for end-of-line and near end-of-line applications when the system operating pressure is near atmospheric levels and when there is minimal probability of a flame stabilizing on the flame arrestor element for an extended period. Enardo Series 7